上海埃飞科技
Worldwide Technology(S. H)产品展示
LUMO能级测试仪
以前没有一种合适的方法能够精确地测量LUMO的能级。ALS公司首次研发出一种能够精确测量 LUMO能级的系统。LE-1系统是一个理想的有机电子研究解决方案。
以前没有一种合适的方法能够精确地测量LUMO的能级。ALS公司首次研发出一种能够精确测量LUMO能级的系统。LE-1系统是一个理想的有机电子研究解决方案。
LE-1的特点和配置
降低电子辐照能量,就能够避免对有机样品的损伤,
能够达到用光电子能谱仪测量HOMO能级一样的测量精度,
即使在超真空条件下,样品、真空和测量也能轻易地自动转换
只要使用LEIPS标准软件,电子亲和性等就能很容易计算得到。
输入测量参数后,开始测量。样品的 谱和LEIPS光谱就能同时被测出来 电流
只要通过简单的操作,就能在测量结果上计算出真空度和电子亲和性
在计算屏上,只要通过光标就能直接读出光谱任何一处的能量值
测量数据要被用来分析的话,就以csv文档格式保存
Previously, there was no suitable method to accurately measure the energy level of LUMO. For the first time, ALS has developed a system that can accurately measure the LUMO energy level. The LE-1 system is an ideal organic electronics research solution.
Features and configuration of LE-1
By reducing the electron irradiation energy, damage to organic samples can be avoided,
It can achieve the same measurement accuracy as measuring HOMO energy level with a photoelectron spectrometer,
Even in ultra-vacuum conditions, sample, vacuum and measurement can be easily and automatically converted
As long as the LEIPS standard software is used, the electronic affinity can be easily calculated.
After entering the measurement parameters, start the measurement. The spectrum of the sample and the LEIPS spectrum can be measured at the same time.
With simple operations, the degree of vacuum and electron affinity can be calculated on the measurement results
On the calculation screen, the energy value of any part of the spectrum can be read directly by just using the cursor
If the measurement data is to be used for analysis, it is saved in a csv file format
因用于机器人各方面应用且与大多数机器人类型兼容,AutoCal系统可以检测出机器人自身构造和工具中心点(TCP)的 突然改变或偏离,并且该系统无需人为干涉就自动地更正这些误差。
AutoCal系统-Dynalog的先进水平校准技术,Dynalog是机器人单元标定技术的世界领导者。它的主流产品DynaCal 系统,被应用于离线的机器人单元校准,并作为最精确的和技术先进的机器人校准程序为许多机器人制造商和终端使用者所接受。AutoCal 系统将已证实的DynaCal校准技术结合到一个在线的全自动系统中,该系统专为程序控制和复原而设计的,价格低廉。
AutoCal系统提供在线的机器人校准方案,旨在快速和自动地保证机械设备的工作性能。因用于机器人各方面应用且与大多数机器人类型兼容,AutoCal系统可以检测出机器人自身构造和工具中心点(TCP)的 突然改变或偏离,并且该系统无需人为干涉就自动地更正这些误差。这意味着不用猜测哪里会出错,不用浪费宝贵时间在机器人程序重复校准上,产品品质无任何损失。
AutoCal系统-Dynalog的先进水平校准技术,Dynalog是机器人单元标定技术的世界领导者。它的主流产品DynaCal 系统,被应用于离线的机器人单元校准,并作为最精确的和技术先进的机器人校准程序为许多机器人制造商和终端使用者所接受。AutoCal 系统将已证实的DynaCal校准技术结合到一个在线的全自动系统中,该系统专为程序控制和复原而设计的,价格低廉。